The Subwoofer – SubF
For most modern/urban musical genres a hefty portion of bass is quite typical. In order to be able to work accurately, an extension of the lower frequencies is required from time to time as the mixing of a song‘s low end can be critical. The SubF has been designed to be the perfect match for the F5 and F7 nearfield monitors. This subwoofer is capable of extending the frequency range down to 30Hz.
The robust 8“ woofer with a 1.5“ voice coil is driven by a 110W (RMS) / 150W (Music) PWM amplifier. These components combine high efficiency with low heat generation and are very capable of handling maximum sound pressure levels over longer time periods.
Several controls on the rear panel of the subwoofer allow adjustments to your needs. Besides the volume control (∞ to +6dB) and a phase reverse switch you have the option to adjust the crossover frequency.
|Basket Ø||8″ (203 mm)|
|Voice coil Ø||1.5″ (38 mm)|
|Cone material||Glass fibre/paper|
|Amp. power RMS / music||110 W / 150 W|
|Analog||XLR / RCA|
|Frequency response||30 Hz – 120 Hz|
|Peak SPL max at 1m||≥107 dB|
|Crossover frequencies||50 – 150 Hz|
|Weight||21.8 lb (9,9 kg)|
|Height x Width x Depth||14″ (350 mm) x 10″ (250 mm) x 13.5″ (341 mm)|